Mechanical processing and CNC machining — 5–780 mm (±0.1 mm) serial sawing, 350–6,100 mm double-head mitre cutting, press punching and CNC milling

Services8–6,000 mm & all-angle cutting

Mechanical Machining & Precision Cutting

We perform all types of mechanical machining according to profile geometry: precision cutting from 8 mm to 6,000 mm, mitre cutting at 15° - 30° - 45° - 90° and any intermediate angle, CNC milling, drilling, and tapping.

Request a quote Message us on WhatsApp +90 505 600 00 01

8–6,000 mm & all-angle cutting

01Precision profile cutting from 8 mm to 6,000 mm (±0.1 mm)
02Cutting at 15° - 30° - 45° - 90° and any custom intermediate angle
03Full CNC milling, drilling, slotting, and punching by profile geometry
04Tapping, countersinking, chamfering, and deburring

8 mm – 6,000 mm (±0.1 mm) Precision Sawing, All-Angle Cutting & CNC Center

To deliver assembly-ready aluminium components directly to your production line, our mechanical fabrication department handles all secondary operations in-house. Precision sawing lines cut profiles from 8 mm to 6,000 mm (including automated 5–780 mm short-piece serial cutting) with ±0.1 mm repeatability.

We perform precision mitre cutting at 15° - 30° - 45° - 90° and all intermediate angles, supported by multi-axis CNC machining centers for slotting, pocket milling, drilling and tapping tailored to profile geometry, plus eccentric presses for high-speed punching.

Deburring, Small-Part Anodizing / Small-Part Coating & Line-Ready Delivery

For cut and CNC-machined short parts, we provide dedicated Small-Part Anodizing and Small-Part Powder Coating so cut edges are fully protected. Automotive, defense, HVAC, LED lighting, solar clamps and furniture components arrive ready for immediate assembly.

Mechanical Processing, Multi-Angle Cutting & CNC Machining Capabilities
Operation / Line	Working Range	Tolerance / Precision	Typical Component Applications
Precision & Serial Short Sawing	8 mm – 6,000 mm (serial short: 5 – 780 mm)	±0.1 mm length repeatability	Solar mid/end clamps, enclosures, handles, spacers
All-Angle Mitre Sawing	350 mm – 6,100 mm bar length	15° - 30° - 45° - 90° & all intermediate angles	Architectural frames, railing, glazing balcony, T-slot T-Slot, solar rails
CNC Profile Milling & Drilling	Multi-axis CAD/CAM machining	Precision slots, pockets and hole patterns	Automotive, defense, HVAC and CPU/GPU heat sinks
Eccentric Press Punching	Dedicated stamping & notching dies	High-volume batch repeatability	Pre-punched PV mounting rails and connector plates
Small-Part Anodizing, Small-Part Coating & Deburring	Metric threading, chamfering & small-part finishing	Burr-free & fully coated cut ends	Bolted mechanical, LED and decorative assemblies

FAQ

Do you anodize/coat before or after CNC machining and cutting?

We support both sequences: short cut/CNC-machined parts are finished via our Small-Part Anodizing and Small-Part Powder Coating lines so cut edges are coated; long profiles are bar-anodized/coated up to 7,000 mm first and then precision-machined with protective foil.

What length range and cutting angles can you produce?

We cut profiles from 8 mm to 6,000 mm (down to 5–780 mm on automatic short-cut saws) within ±0.1 mm tolerance, at 15° - 30° - 45° - 90° and all intermediate angles.

Can you build punching dies for high-volume perforated profiles?

Yes. For large series, our tool shop builds dedicated eccentric press punching and notching dies to reduce cycle time and unit cost.