Solar Energy (PV)
High-strength mounting rails, mid/end clamps, and photovoltaic module frame profiles for rooftop and ground-mount solar power plants.
High-Volume Solar PV Mounting Rails, Clamps and Module Frames
Rooftop and utility-scale ground-mount photovoltaic (PV) structures must withstand decades of wind uplift, snow loads and outdoor corrosion. We extrude solar mounting profiles in EN AW-6005A T6 and EN AW-6063 T6/T66 certified to EN 755-2.
Combining 7,000 mm anodizing capacity with automated 5–780 mm (±0.1 mm) short-piece sawing and eccentric press punching, PM ALÜMİNYUM delivers high-volume solar rails, mini-rails and ready-to-install mid/end clamps.
| Profile Group / Application | Recommended Alloy | Temper | Surface Finish & Tolerance |
|---|---|---|---|
| Rooftop & Ground-Mount PV Carrier Rails | EN AW-6005A / EN AW-6063 | T6 / T66 | Single-piece lengths up to 7,000 mm, mill or anodized |
| PV Mid Clamps & End Clamps | EN AW-6005A / EN AW-6063 | T6 | 5–780 mm (±0.1 mm) sawing + press punching & deburring |
| Photovoltaic Solar Module Frame Profiles | EN AW-6063 / EN AW-6005A | T6 | Silver or black anodized + 45° double-head mitre cutting |
| Trapezoidal Roof Mini-Rails & Splice Connectors | EN AW-6063 / EN AW-6005A | T6 | Pre-punched fastener slots & EPDM gasket channels |
FAQ
Do you supply solar mid clamps and end clamps cut, punched and anodized?
Yes. We extrude the clamp profile, cut pieces on our 5–780 mm (±0.1 mm) automatic saws, punch bolt holes on eccentric presses, and deliver them anodized or mill-finish in export cartons.
What is the maximum single-piece length for solar mounting rails?
We supply mill-finish and anodized solar mounting rails in standard 4–6 m lengths or custom single-piece lengths up to 7,000 mm.
Related Engineering & Manufacturing Resources
5000, 6000 & 7000 Series Alloys (EN 573-3 / EN 755-2)
Chemical composition and mechanical property tables for EN AW-5083, 5754, 6060, 6063, 6005A, 6082, 6463, 7020 and 7075.
Read more
Plant, 5-6-7 Inch Presses & Small-Part Finishing
5-6-7 inch (1,000–2,000 t) presses, 80–20,000 g/m, min. 0.8 mm wall, bar/small-part anodizing & 8–6,000 mm cutting.
Read more
All Production Services (8 Integrated Units)
From custom dies and standard profiles to 5000-6000-7000 extrusion, small-part anodizing/coating and all-angle CNC.
Read more
Request a Quote
Send your section drawing and annual volume; the quotation is prepared together with the die and production plan.