Standard Profiles (Box, Flat Bar, Tube)
Extensive ready-die network with zero tooling cost across square and rectangular box sections, flat bars, round tubes, L-angles, U-channels, T-bars, and solid rods.
Extensive Standard Die Network: Box Sections, Flat Bars, Tubes, Angles & Channels
For general engineering, structural fabrication, machinery, transport and architectural sub-frames, our extensive in-house standard die library eliminates tooling lead time across hundreds of square/rectangular box sections, flat bars, round tubes, L-angles, U-channels and T-bars.
Extruded on our 5, 6 and 7 inch (1,000 t, 1,400 t, 2,000 t) presses in 5000, 6000 and 7000 series alloys (PREMIUM primary or certified secondary billet), standard profiles can be supplied in mill finish, 7,000 mm anodized/powder-coated bars, or precision cut (8–6,000 mm at any angle) and CNC-machined.
| Profile Group / Application | Recommended Alloy | Temper | Surface Finish & Tolerance |
|---|---|---|---|
| Square & Rectangular Aluminium Box Sections (Hollows) | EN AW-6060 / 6063 / 6005A / 6082 | T5 / T6 / T66 | 10×10 mm up to 150×150 & 50×200 mm + 7,000 mm anodizing/RAL |
| Aluminium Flat Bars (Busbars/Strips) & Solid Rods | EN AW-6063 / 6082 / 5754 / 7075 | H112 / T6 | 80 g/m to 20,000 g/m range + ±0.1 mm sawing & punching |
| Round Aluminium Tubes & Pipes | EN AW-6060 / 6063 / 6082 / 5083 | T5 / T6 | Min. 0.8 mm wall thickness + polishing, brushing, anodizing |
| Equal/Unequal L-Angles, U-Channels & T-Sections | EN AW-6060 / 6063 / 6005A / 6082 | T5 / T6 | 15°–30°–45°–90° mitre cutting + small-part anodizing/coating |
FAQ
Is there a tooling charge for standard box, flat bar and tube profiles?
No. All profiles produced from our existing standard die inventory require zero tooling investment.
Can standard profiles be supplied cut-to-length, mitre-cut and surface-treated?
Yes. Beyond standard 4–6 m bars, we saw from 8 mm to 6,000 mm (±0.1 mm) at 15°–30°–45°–90° or any intermediate angle, and offer both bar and small-part anodizing/powder coating.
Related Engineering & Manufacturing Resources
5000, 6000 & 7000 Series Alloys (EN 573-3 / EN 755-2)
Chemical composition and mechanical property tables for EN AW-5083, 5754, 6060, 6063, 6005A, 6082, 6463, 7020 and 7075.
Read more
Plant, 5-6-7 Inch Presses & Small-Part Finishing
5-6-7 inch (1,000–2,000 t) presses, 80–20,000 g/m, min. 0.8 mm wall, bar/small-part anodizing & 8–6,000 mm cutting.
Read more
All Production Services (8 Integrated Units)
From custom dies and standard profiles to 5000-6000-7000 extrusion, small-part anodizing/coating and all-angle CNC.
Read more
Request a Quote
Send your section drawing and annual volume; the quotation is prepared together with the die and production plan.